The Vandy Vape Pulse AIO V2 Kit is an update to the previous models.
So far we have had the Pulse AIO, Pulse AIO.5 and the Pulse AIO Mini kits. What does the V2 have to offer?
Details of The Vandy Vape Pulse AIO V2 Kit:
The “AIO” stands for “All In One”. Meaning the tank, battery and chipset all live in the same housing.
This is a weeny little kit – it is even smaller than the Pulse AIO Mini!
You will need a single 18650 battery (which is not included) and the output is adjustable for Wattage or Voltage from 5-80W (0.5-6V). Plus there are temperature control / TCR and Bypass user modes to play with.
It is worth noting there is no USB port on here, you will need an external charger. This does also mean there will be no firmware updates.
This is very customisable with plenty of replaceable parts – from the side panels, buttons to the button housings. You will just need a T5 screwdriver bit to disassemble.
You can 3D print your own parts – Vandy Vape will even give you blueprints!
The circuit board is IP67 rated for water resistance just in case you get any e-juice leaks. Not to mention the whole device can be dismantled for cleaning.
To reduce internal resistance, the battery positive connection is connected directly to the circuit board.
The internal drip tip is adjustable to grip the tank contacts and the battery contact is adjustable too.
Inside the drip tip are airflow outlet restrictor pipes, there are 3 sizes included in the kit. You also get 2 drip tip sleeves – White and Black.
Included in the kit is the Pulse AIO V2 RBA – which is basically a tank with a removable rebuildable deck.
The deck is designed like a “Bridge” (a universal tank base which allows use of different types of coil or stock coils). It is compatible with any BORO tank.
It has 2 posts with recesses to allow access for cutting the coil legs.
On the deck there are replaceable airflow inlet pipes, there are 4 sizes to choose from to restrict the incoming airflow from the honeycomb inlets.
A side fill port allows you to fill with up to 6ml of your own e-juice.
A 510 adaptor is included to allow you to build the deck and provide power whilst building. This just screws into the mod to bypass the tank section.
Main Features:
1. Smallest compact size, Aluminum alloy fine carving material.
2. Maximum 80w output power.
3. IP67 PCBA waterproof rating.
4. Replaceable key switch circuit board.
5. Battery positive through circuit board.
6. Multiple options for DIY customization.
7. New RBA and tank.
Technical Data:
Size: 51*77.3*23.4mm
Power range: 5-80W
Output Voltage: 0.5-6.0V
Maximum output Current: 32A
Resistance: 0.05-3.0ohm(+-5%)
Battery Type: 18650
Material: Aluminum alloy+Stainless steels+PCTG
RBA Capacity: 6ml
Package Includes:
1* Pulse AIO V2 Kit
4* RBA Airflow Pipe
1* Instruction Manual
1* 510 Adapter
2* Drip Tip
1* RBA
1* Accessory Bag
3* Drip Tip Airflow Pipe
Anyway do you think that they have thought of everything with the new Vandy Vape Pulse AIO V2 Kit? Let me know in the comments below!