The Uwell Crown S Kit is the latest addition to the popular Uwell Crown range.
The Uwell Crown range is quite diverse from pod kits such as the Crown B and Crown X, sub ohm tanks such as the Crown 3 and Crown V (5) and even box mods including the Crown 4.
Details of The Uwell Crown SKit:
This is a pod kit with 2 main components – the pod (or tank) and the mod (or battery).
What makes this stand out from other kits is the output!
Uwell say this has a maximum output of 75W! Which is huge for a pod kit.
You cannot fully adjust the output though, but you have 3 power levels to choose from. The actual output will be dictated by the mod according to which coil is installed.
Inside the mod is a 1500mAh battery which is charged using the USB Type C port at a fast 2A charge rate.
There is an airflow slider on the side of the mod to fine tune your incoming airflow.
When it comes to vaping you have 3 activation methods to choose from. Either select auto draw, button fire or both!
The pods boast a 5ml capacity as standard – which will sadly be reduced to 2ml for TPD regulated areas.
A side fill port is provided for refilling.
The coil is fixed in the pod – this means when the coil fails you discard the pod section and replace with a new one. No messy coil changes.
0.2ohm and 0.6ohm pods are included in the kit and it looks like there will also be a 1ohm version available separately.
Technical Data:
Size:35.5*17.5*112.8mm
Material:PCTG, PC+PBT, POM
Pod Capacity:5ml
Output Power:Max 75W
Battery Capacity:1500mAh
Filling Type:Side filling
Cartridge Specifications: 0.2Ω/0.6/1.0Ω Uwell Crown S Integrated Coil Cartridge (1.0Ω sold separately)
Package Includes:
1* UWELL CROWN S Device
1* 0.2 Ω UWELL CROWN S Integrated Coil Cartridge
1* 0.6 Ω UWELL CROWN S Integrated Coil Cartridge
1* Type-C Charging Cable
1* User Manual
Anyway let me know your first impressions of the Uwell Crown S Kit in the comments below!