The Smok Morph Pod 80 / Morph Pod 80S Kit are two new additions to the “Morph” range of devices…
The family also includes the Morph 219 Kit, Morph 2 and Morph Pod 40, so what does the Morph Pod 80 / S bring to the range…
Details of The Smok Morph Pod 80 / Morph Pod 80S…
As you can see there are two versions of this – the Morph Pod 80 and the Morph Pod 80S.
The main difference between the two kits is the power supply. The Morph Pod 80 has a 3000mAh internal battery and the Morph Pod 80S uses a removable 18650 battery which is not included.
Another strange difference is the charging rate, both kits have a USB Type C port and the rate for the internal battery version is 1.4A and the 18650 version is 1.5A.
Other than the physical size of the kit they are otherwise pretty much the same.
The output is stated as 5-80W which I assume is a variable wattage mode – there is no mention of any other user modes.
Again no mention of the screen size – but it is an OLED type and appears to be just a plain black and white screen – but you can rotate the display direction to your preference.
The mod body also houses the airflow adjustment and the full length fire bar.
Looking at the pod now this has a top fill port and in standard format a huge 5ml capacity. For TPD regulated areas this is reduced to 2ml.
This is compatible with the LP2 range of coils also found in the RPM 4, G-Priv Pod and the Nord 50W. The 0.23ohm Meshed and 0.4ohm Meshed coils are included in the kit.
There are 8 colour options to choose from: Black Red, Black Blue, Black Green, Black Brown, Brown, Black, Grey and Black Carbon Fibre.
Kit Includes
1 x SMOK Morph Pod-80/Morph S Pod-80 Device
1 X SMOK MORPH POD-80 LP2 Pod (LP2 Meshed 0.23ohm DL Coil Preinstalled) (5ml)
1 x SMOK LP2 Meshed 0.4ohm Coil
1 x Type-C Cable
1 x User Manual
Smok Morph Pod 80 / Morph Pod 80S Specs
Morph Pod-80
Size:39*30*113.9mm
Weight:133.5g
Output Wattage:5W-80W
Battery Capacity:3000mAh
Standby Current:< 100uA
Input Voltage:3.3V-4.2V
Output Voltage:0.8V-4.1V
Resistance Range:0.15ohm-2.5ohm
Charging Voltage:5V±0.2V
Charging Current:1.4A (Max)
Overcharge Voltage:4.3V±0.05V
Over-discharge Voltage:2.4V±0.05V
Overcharge Current:2A±0.6A
Morph S Pod-80
Size:39.50* 29.9* 123.35mm
Weight:105.5g
Battery:a single 18650 battery
Overcharge Voltage:4.3V±0.05V
Output Wattage:5W-80W
Standby Current:100uA
Input Voltage:3.3v-4.2V
Output Voltage:0.8V-4.1V
Resistance Range:0.15ohm-2.5ohm
Charging Voltage:5V±0.2V
Charging Current:1.5A (Max)
What do you think of the Smok Morph Pod 80 / Morph Pod 80S Kit? Let Me Know!!