The Oumier Wasp Nano RDA Pro is the newest addition to this popular range of Rebuildable Atomisers.
Previous members include the Wasp Nano RDTA, Wasp Nano RTA, Wasp Nano MTL RTA, Wasp Nano RDA V2 and Wasp Nano RTA Max!
Details of the Oumier Wasp Nano RDA Pro:
This takes the format of a traditional RDA with some nice extra features.
Basically the deck is designed for Single Coil builds with easy to use double clamps. The excess coil leg can be easily trimmed with the coil installed.
The side of the deck features multiple slot airflow outlets to surround the coil with the incoming air.
These outlets then align with the airflow cap adjustment system.
By rotating the cap you can choose from combinations of slots and honeycomb hole arrangements which give different airflow speeds and directions.
Plus you can close or open the amount of incoming air to suit the restriction you prefer.
The kit even includes a coil and cotton to get you started.
A Bottom Feed (BF) Hollow 510 pin is included so you can use the RDA on Squonk mods.
The drip tip is an 810 fitting so this can easily be changed – especially as you get a spare in the kit too!
Main Feaures:
1. 360° Adjustable airflow
2. Replaceable 810 Drip Tip
3. single coil configuration
4. Fashionable color schemes
5. Base width 22mm
6. Outer width 23.5mm
Technical Data:
Size: 23.5mm*28mm
Single Coil
BF Pin
Adjustable airflow system
810 Drip Tip
360 degree Adjustable airflow
Replaceable 810 Drip Tip
Easy build single coil
Fashionable color schemes
Package Includes:
1* Wasp Nano RDA Pro
3* Silicone Ring
1* Prebuilt Coil 0.28ohm
2* Slotted Set Screw
2* Phillips Screw
1* Screwdriver
1* Cotton
1* BF Pin
1* Extra Drip Tip
1* Manual
The Wasp Nano RDA Pro definitely looks the business and being only 22mm at the base should be ideal for most box mods. Let me know your thoughts in the comments below!