Innokin Sceptre 2 Review

Innokin followed this with the Sceptre MTL Kit which was an update with 2 of the 0.65ohm coils included. Also there was the Sceptre Tube version as well which used the same S-Coil range.

I have high hopes for the Sceptre 2 – so let’s get stuck in and see if it delivers!

Details of The Innokin Sceptre 2:

This version has more in common with the original Sceptre than the Sceptre tube.

The styling is pretty much the same, the body is slightly shorter and not as wide.

However there have been some great updates…

Firstly and the main update for me is the improvement on the original fiddly coil change system. This version has a push in coil installation.

Also this is still compatible with the S-Coil range and you get the 0.5ohm and 0.6ohm coils included in the kit.

Another great update is the fact you no longer have to remove the pod to change the airflow setting. There is a simple slide adjustment located on the side of the pod.

Battery wise this is still the same at 1400mAh but this time you have a USB Type C port which apparently charges at up to 0.8A charge rate.

As before you have 2 power levels – the left hand LED indicator lights up Purple (Boost power level) or Blue for Normal power level. You can change between the two settings.

The right hand LED displays the battery capacity remaining and changes colour.

A manual fire button is provided but this device also has an auto draw system meaning you can simply inhale on the mouthpiece and the device will fire.

The pod is refillable with up to 3ml (Standard)  of your own e-liquid via the side fill port.

Technical Data:
Size: 104.3mm*27.93mm*17.6mm
Battery: Internal 1400mAh
Normal Mode
Boost Mode
Intelligent Coil Identification
Zinc-Alloy Chassis Construction
Intuitive Firing Button
LED Indicator Lights
Pod Capacity: 3ml
Fill System: Side - Silicone Stoppered
Coil Series: Innokin S Coils
Threaded Coil Base
Magnetic Pod Connection
Charging: Type-C Port

Package Includes:
1* Sceptre 2 Pod System
1* 0.5ohm S Coil
1* 0.6ohm S Coil
1* Type-C Cable
1* Quick Start Guide
1* Warning Booklet

Have you tried the Innokin Sceptre 2? If so let us know your thoughts in the comments below!

Back to blog