Digiflavor XP 77W Kit Preview

The Digiflavor XP 77W Kit is the latest release from a Digiflavor brand who went very quiet for a while and are now back with a Bang!

Digiflavor made their name with some great vape gear including the Siren Range, the Drop Range and Themis RTA to name a few!

Details of the Digiflavor XP 77W Kit:
Digiflavor are part of the Geekvape brand and as you will see in this preview there are some crossovers between the two.

Anyway the kit is described as being “Digiflavor meets Cyberpunk” and the customisable LED effects sure fit in with that description!

The main new feature you will notice is the fire button. This is called the “Crown” in Digispeak and is also rotatable and used for adjustments and menu navigation.

This Crown is also lockable to prevent accidental firing or adjustment and you can lock all the features or just the adjustment.

A 0.96in colour TFT display is provided and you have Variable Wattage, Temperature Control, Variable Power Curves (VPC) and Bypass user modes.

The output is specified as 5-77W but there is no mention of the output voltage.

You will need a single 18650 battery which can be charged via the USB Type C Port at up to 2A charge rate.

A 510 connection on the top of the mod and the tank base means these are both compatible with other 510 devices.

Looking at the pod now – this is the new XP Pod Tank and uses the Geekvape P series coil range which are also found in the B100 and Aegis Boost Pro kits.

You get the 0.2ohm and 0.4ohm mesh coils included in the kit.

The pod tank consists of a pod which magnetically attaches to the tank base.

The tank base has a 510 connection and also houses the airflow adjustment.

To fill you remove the pod section from the tank base and there is a refill port located on the pod base.

Package Includes:
1* Digiflavor XP 77W Mod
1* Digiflavor XP Pod Tank (4.5ml)
2* GeekVape P Series Coil (Pre-installed: 0.2Ω 60W-70W; Spare Coil: 0.4Ω 50W-60W)
1* User Manual
1* 810 Drip Tip
1* Type-C USB Cable
1* Spare Parts Pack
3* 18650 Battery Accessories

Main Features:
1. Powered by single 18650 battery with max 77W output
2. Customizable LED effects: RGB
3. Type-C 5V/2A fast charging
4. Brand-new UI, 0.96 inch TFT screen
5. Multi-use digi-crown
6. Safety protection switch
7. Accidental press protection
8. 4.5ml XP Pod Tank
9. Geekvape P series coil

Technical Data:
Battery: Single 18650 battery (not included)
Charging: Type-C, DC 5V/2A, small current adaptor, automatic current limit charging
Max Charging Voltage: 18V
Power: 5W-77W (0.5W for each adjustment)
Mode: Power, TC-NI, TC-TI, TC-SS, TC-TCR, VPC, Bypass
Temperature: 200°F-600°F (5°F for each adjustment)/100°C-315°C (1°C for each adjustment)
Screen: 0.96-inch TFT color display
Battery Low-voltage Protection: <3.2V before output or <2.8V during output
Over-temperature Protection: PCBA >65°C before output or >85°C during output
Battery Reverse Polarity Protection: Support
Short Circuit Protection: <0.8Ω
Timeout Protection: 10s
Crown Button Function: Firing by pressing & output adjustment by rotating
Thread: 510
E-liquid Capacity: 4.5ml
Airflow: Bottom airflow
Resistance Range: 0.1-2Ω
Resistance: 0.2ohm (60-70W), 0.4ohm (50-60W)
Compatible with: Digiflavor XP Pod Tank/GeekVape P Series Coil

What are your first impressions of the Digiflavor XP 77W Kit? Let me know in the comments below!
Back to blog