BP MODS IAIDO DNA 60W Mod Preview – Little And Large?

The BP MODS IAIDO DNA 60W Mod is a new super sexy release with some great features.

iaido banner

More Details On The BP MODS IAIDO DNA 60W Mod…

One thing which caught my eye is the name – Iaido – which is a Japanese Martial Art. Originally the mod was to be called the “Laido” which was apparently a translation mistake – and the term apparently means Repulsive or Obscene in Italian!iaido name

 

The mod has a great brain to start with – the Evolv DNA60W chipset which also allows you to upgrade and customise the firmware using the Escribe software.
iaido components

Cleverly this mod is also able to use two different batteries – which also changes this from a full size mod to a compact mod.iaido with 18650 adaptor

If using a 18650 battery this simply inserts into the 18650 battery tube included in the kit.iaido 18650 mode

However if you want a smaller device grab a 18350 battery, remove the lower portion of the mod and replace with the 18350 adaptor and you are away with a tiny box mod.iaido 18350 mode

The output is rated as 1-60W and from what I can see you have Variable Wattage and Temperature Control user modes. If you use the Escribe software apparently you can activate Custom Curve modes too.

The display is a 0.69in OLED screen and the control buttons are located to the side of the mod.iaido both modes

Included in the generous kit are 2 beauty rings – 24mm and 22mm – these make the connection between the tank and mod look a lot smoother.iaido green both modes

The USB port can handle up to 1A charging and is also utilised for connection to the Escribe software.

So far I have only found the mod in 2 colours – Black and Everglade Green.

iaido colours

Kit Includes

  • Iaido mod
  • 1x 18350 adaptor pack
  • Accessories pack
  • USB Type C cable
  • 2x Beauty ring
  • User manual

BP MODS IAIDO DNA 60W Mod Specs

  • Size: 26×38.8×84.3mm (18650 mode) / 26×38.8×54.3mm (18650 mode)
  • Output: 1-60W (0.2-9V)
  • User modes: VW, TC (Ni200, Ti, SS)
  • Battery: 1×18650 / 1×18350 (not included)
  • Display: 0.69in OLED Screen
  • Resistance range: Not specified
  • Temperature control limits: 200-600°F / 93-315°C
  • DNA60 chipset with Boost mode
  • USB Type C port – 1A charging
  • Firmware upgradeable / customisable using Escribe software
  • 22mm and 24mm beauty rings included

iaido specs

Let me know what you think of the BP MODS IAIDO DNA 60W Mod in the comments below!

Back to blog